Technical Information
Overlay tiles are manufactured from Glass Fibre Reinforced Concrete to the highest standards BS EN ISO 9001:2000.
Please see our "How To Lay Tiles" section for a step by step guide on laying tiles.
Tiles sizes and weight vary slightly dependant on the finishe chosen. Please see details below.
Checkerplate
Width=297mm Length=297mm Depth=12mm
2kg per tile
Striated
Width=297mm Length=297mm Depth=12mm
2kg per tile
Imperial
Width=297mm Length=297mm Depth=12mm
2kg per tile
Riven
Width=294mm Length=294mm Depth=14mm
2.2kg per tile
Please click on the link below to see out tile chart.
Overlay Tiles Chart
PU Adhesive
PU Adhesive is specially designed to give durable and economical fixing of Overlay Tiles to paving slabs, concrete, asphalt and roofing felt. During curing, the adhesive absorbs moisture from the atmosphere and expands providing a firm support to the tile. This results in an effective and practical fixing method which can be used in damp and humid conditions. Please see instructions for use and data sheet below for further information.
Note: PU adhesive must be used as per instructions on the bottle or below.
PU Adhesive is supplied in 1 litre bottles. One bottle will be sufficient for between 40-50 tiles.
PU Adhesive Instructions
PU Adhesive Data Sheet
Overlay Tiles Sealant
Overlay tiles sealant is ideal for helping to protect your tiles from stains and efflorescense. Sealant also enhances the look of overlay tiles and is very easy to apply.
Supplied in 1 Litre Bottles. One bottle will seal between 40-60 tiles dependant on amount applied.
Sealant Instructions & Precautions
Sealant Data Sheet
Overlay Tiles Cleaner
Overlay Tiles cleaner can be used to clean your tiles of efflorescense, dirt and many stains. Please see instructions for use below for more information. Supplied in 1 litre bottles. One bottle will clean between 60-80 tiles.
Cleaner Instructions and Precautions
Soft Shims
Soft Shims are used to build tiles up over uneven sufaces.This allows the PU Adhesive to foam and take up the gap. The shims are made from a soft foam rubber and are adhesive on both sides.
The Shims Size: length=25mm width=10mm depth=3mm. Minimum order of 100 shims.
Shims should never be stacked more that two high. Please see instructions below.
Soft Shim Instructions
